Oxeo inert gas extinguishing systems utilize inert gases, such as argon or nitrogen, and the resulting reduction of the oxygen content. They are suitable for protecting areas with high-quality yet sensitive equipment, where residue-free extinguishing - without the use of water, foam or powder extinguishing agent - is to be preferred. Argon and nitrogen are natural components of ambient air and also non-toxic and non-electrically conductive.
Excellent extinguishing effect even in special hazard zones and in areas with high or concealed fire hazards
The inert gases used are non-conductive and leave no residues - this makes them ideal for the protection of highly-valuable and sensitive equipment
In the concentrations required for extinguishing inert gases used are non-toxic and therefore suitable for use in areas that are accessed by people
Nitrogen and argon are natural components of ambient air - no harmful impact on the atmosphere
Nitrogen and argon are available almost everywhere - this means, quick and cost effective reactivation after operation
Cost-effective multi-zone systems with extinguishing gas storage can be implemented for several extinguishing zones
High degree of flexibility for modification or extension measures, thanks to the Oxeo storage system
Oxeo technology enables a more compact storage of the extinguishing agent, requiring up to 50% less space
ConstantFlow technology ensures a constant flow of the extinguishing agent in the event of a fire - this permits the use of pressure relief flaps that are up to 70% smaller
The MX DesignManager calculates the perfect system option and solution for every project
The Type VN nozzle is available in various sizes and offers an innovative solution: thanks to a patented technology, it can be adapted to the required extinguishing agent throughput in the installed state. Changes in space require only an exchange of the diaphragm, but not the entire nozzle.
Flooding a room with gas always creates over pressurization of the room. This may cause damage to doors, ceilings and walls, unless suitable counter-measures are taken. To negate this effect, a pressure relief flap corresponding to the expected flow of extinguishing agent is usually installed in the protected room when the gas extinguishing system is installed. This flap opens when a pre-determined room pressure is reached, allowing the air displaced by the gas to escape directly to the exterior.
Thanks to the special SPA type nozzles, with sound absorbers, in combination with the ConstantFlow technology, it is possible to achieve “soft flooding” of the rooms in the event of a fire: During the emission of the inert gas, the sound pressure level is significantly reduced and the flooding process with the Oxeo extinguishing system is generally far gentler. In this way the protected equipment is protected against strong vibrations and particularly sensitive facilities, such as rotating hard drives in server rooms and data centers, are less subject to harmful impacts.
Oxeo extinguishing systems are controlled and monitored through the tried and tested Minimax fire detection and extinguishing control technology. This ensures perfect compatibility, backed up by general approvals of electrical and mechanical system components. Unnecessary coordination costs and efforts or interface problems between different parts of the system are thus avoided. The extinguishing zones are continuously monitored by smoke, heat and/or flame detectors. In the event of a fire, these detectors transmit a signal to the FMZ 5000 fire detection and extinguishing control panel. The panel then activates the Oxeo extinguishing system and, in the case of multi-zone systems, the relevant selector valve. At the same time, it triggers an acoustic and optical alarm, which urges anyone present in the zone to leave the room affected, and simultaneously sends a signal to a permanently manned station. Once the individually defined pre-warning time expires, the actual extinguishing process starts. This means that the extinguishing gas is delivered to the extinguishing zone by means of the pipe network and emitted from the extinguishing nozzles thus extruding the oxygen from the source of the fire.
Extinguishing gas storage
The extinguishing agent is stored in high-pressure gas cylinders, which are then used in combination, enabling both the optimization of available space and extendibility of the Oxeo storage system. The filling pressure of every single cylinder is constantly monitored for leakage with pressure gauges and the results are displayed. Any error messages are transmitted to the fire detection and extinguishing control panel. This means that the quantity of available gas is constantly controlled. The quantity of extinguishing gas to be stocked depends on the fire hazard and the size and nature of the protected facility. The modular structure of the Oxeo storage system allows for perfect adaptation to the customer’s individual needs and local conditions and offers maximum flexibility, especially for system modification or extension.
Extinguishing zones and zone subvisions
A pipe network with Oxeo extinguishing nozzles runs through the protected area. The size of the pipe network and the overall arrangement of the extinguishing nozzles are determined by the respective risk. Oxeo fire extinguishing systems can be used as a single-zone system for the protection of one extinguishing area or as a multi-zone system for the protection of two or more extinguishing areas. Multi-zone systems are equipped with section valves which, in the event of a fire, only disperse the extinguishing agent in the affected extinguishing area. Individually controllable containers release a precise quantity of extinguishing agent tailored to the extinguishing area. As a result, separate fire extinguishing systems are not required. Extinguishing agent storage doesn’t exceed the amount required for the largest extinguishing zone in the system. In addition, the system can be easily adapted to building conversions. The quantity of fire extinguishing agent to be discharged and the flooding time determine the arrangement of the extinguishing nozzles and the complexity of the pipe network. Special design extinguishing nozzles make it easy to layout the pipe network.
Control rooms are very sensitive and high-quality facilities which control fundamental production processes. They contain electric switching and control equipment plus false floors with extensive cabling. Even minor defects may cause substantial operational failures.
Highly flammable materials
Oxeo inert gas extinguishing systems offer reliable protection in control rooms. For smaller control rooms, MX 1230 extinguishing systems offer an economical alternative. The extinguishing system is triggered by a fire detection system using punctiform smoke detectors or HELIOS AMX5000 aspirating smoke detectors.
Filter systems are used whenever the production process generates fumes, or when dusts are released through abrasion. Fine dusts occur for example, when milling or cutting plastics or when processing other materials.
Highly flammable dust in the filter bags
Carbon dioxide extinguishing systems are ideal for protecting filter housings against fires. In the case of metal extraction, however, the Oxeo extinguishing system using the argon extinguishing agent is the right choice to preclude interactions of the extinguishing agent with combustible metal. A fire detection system will trigger the extinguishing system.
Server rooms are important, sensitive areas. In these rooms, data of high importance for business operations is stored, managed and exchanged over the network. The irretrievable loss of this data through a fire may have considerable economic consequences for productivity or even the future of a company.
Overheating of technical equipment
Defects such as short circuits
Considerable damage even in the case of small fires
For small and medium-sized server rooms, the MX 1230 extinguishing system is the ideal solution. It gives residue-free extinguishing using the innovative Novec™ 1230 extinguishing agents and requires very little space. Oxeo inert gas extinguishing systems are ideal for large server rooms. The MX 1230 extinguishing system and Oxeo inert gas extinguishing systems are triggered, and fires are detected, by a fire detection system using a HELIOS AMX5000 smoke aspirating system.
HVACR rooms are an absolute key area for the proper operation of a building. In addition to switching and control systems for the elevator system, they house safety-relevant HVACR systems, such as overpressure control, that keep the escape routes smoke-free in the event of fire. The facilities are particularly sensitive and must function without interruption - only then can the operation be maintained without problems on all floors of the building.
Overheated ventilators, compressors and cooling units
Short circuits on electronic components
In case of particularly high availability requirements, e.g. for the switching and control system of the elevator system, residue-free extinguishing with Oxeo extinguishing systems or MX 1230 fire extinguishing systems makes sense. A fire detection system using the HELIOS AMX5000 smoke aspirating system triggers the extinguishing system.
Alternatively HVACR rooms can be integrated into the overall building protection through sprinkler systems. If necessary, the use of Preaction sprinklers makes an unintentional triggering of extinguishing system virtually impossible.