The Clunid FMZ6000 is a modular fire detection and extinguishing control panel, precisely tuned and assembled to the particular customer requirements. High levels of operating safety and simple operation characterize the unique properties of the Clunid panel generation.
High levels of operating safety
The processors in all function modules and zone operating panels are always implemented redundantly.
Automatic plausibility checks prevent user errors right from configuration up to the upload.
Updates and parameterizations take place during operation, thus
reducing risky shutdowns
Simple to use
Intuitive and modern user guidance via touch display
Consistently self-explanatory icons with binding operating instructions prevent errors
Flat menu structures allow direct and rapid navigation for all events
Limitless application possibilities
Control of complex multiple-zone extinguishing systems via modular system technology
New communication protocols allow wide selection of detectors and actuators
International hard and software requirements are integrated and certified
As standard the Clunid FMZ6000 is fitted with a 7" touch display including group displays, a central and redundant signal processing unit, power supply unit and battery supply. It is prepared for up to 80 function modules and 27 zone control panels.
The LogicManager configuration software automatically generates general system documentation. So when making changes to configuration and use, documentation becomes child’s play. To assist with maintenance work on site, fitters and technicians can use ServiceAssistant to read off the actual status of the control panel and event and history messages at any time during operation.
The sophisticated module concept offers a series of additional benefits for project planning and service. All modules have the same size and can be used regardless of module type on any slot in the control panel. This allows space in the control panel housing to be used flexibly and optimally - right down to the last slot.
When a module is incorporated, addressing is automatic, so that the control panel is immediately ready for operation. This reduces project planning times, because manual hardware and software assignment is not applicable.
LogicManager configuration software
LogicManager is the configuration software for the Clunid FMZ6000. This is constructed on the component concept and consistently separates logic and hardware. For example it is possible to change between loop and limit value functions at any time without having to restart the configuration This offers flexibility and reduces project overhead. Moreover LogicManager has a fully implemented redo and undo design and numerous logic modules with extra features.
To assist with maintenance work on site, fitters and technicians can use ServiceAssistant to read off the actual status of the control panel and event and history messages at any time during operation. Information and images can be easily stored and called up later during follow-up work. Furthermore various parameters can be directly adjusted to the installation conditions on site.
Documentation of activity for commissioning, maintenance, inspection or troubleshooting also takes place in ServiceAssistant. A sophisticated role design grants different authorizations depending on the level of skills and experience.
The ServiceBox is connected to the control panel via a USB interface. Using a WLAN connection the technician can carry out both an upload and download of the LogicManager configuration and service work via the ServiceBox. Consequently a system update of all control panel components can still only take place via an interface, so that this process does not require any special skills and tools. The licensing design ensures that only authorized persons can work on the control panel.
Various areas of application
The Clunid FMZ6000 meets the requirements for different applications. It is used among other things:
As a pure fire detection control panel
As a pure fire detection control panelAs a combined fire detection and extinguishing control panel for gas and spark extinguishing systems
As a monitoring panel for water-based suppression systems
For the activation and monitoring of pilot-operated dry alarm valve stations
For the activation of hydrant systems in Loop technology
For the activation of FSX valves (hydrant technology) with and without external resetting
As a control panel for complex fire incidentmatrices for active principle test
Archives house documents and information in the form of paper files or data carriers. Shelving bays or mobile storage racks make for transparent storage and as needed for quick access to specific information. The ceiling height is typically used to the limit.
Technical defects in devices such as the motors of electric mobile storage racks
Overheating of ceiling lighting
Highly flammable materials
Sprinkler systems installed for the overall protection of the building typically provide the necessary safety in archives. The use of Preaction sprinklers prevents an unintentional triggering of the extinguishing system caused by accidental damage to a sprinkler. Oxeo inert gas extinguishing systems completely exclude water damage to archived materials. They are also an optimal solution if the distance between the upper edge of the shelves and the ceiling is too narrow for sprinklers. Oxeo extinguishing systems are triggered by a fire detection system using HELIOS AMX5000 aspirating smoke detectors.
Control stations are the focal point to ensure permanent safety checks. These control stations are often located in small to medium-sized rooms equipped with monitors and other technical equipment for visual supervision, e.g. with Minimax Inveron.
Technical defects, such as short circuits
Overheating of computers or other electronic devices
Control stations can be integrated into an existing sprinkler system for building protection. To provide additional protection for electric and electronic devices, the risk of accidental triggering of the sprinkler systems is reduced through the use of Preaction sprinklers.
High rack storage shelves are up to 50m high and are mostly designed for the intake of Europallets. Their capacity ranges from a few thousand to several hundred thousand pallet storage positions. On a very small surface area they offer space for extremely large quantities of goods and products. Between every two rows of storage shelves there is an alley in which rack feeders move up and down.
Rapid spreading of fire in a vertical direction due to stacked pallets
Chimney effect, i.e. flames and fire gases are drawn upward through the shafts
Sprinkler systems have been proven to work well in high rack storage facilities. In the conventional version, sprinklers are installed both under the ceiling and in the shelves. However, the installation of shelf sprinklers is rendered unnecessary if ESFR (Early Suppression Fast Response) sprinklers, which are installed only in the ceiling, can be deployed. Fire detection systems for the early detection of fires are also used to supplement sprinkler systems in high rack storage facilities. In these cases, Minimax recommends the use of HELIOS AMX5000 aspirating smoke detectors with a vertical installation of the suction lines in the shelves and mounting the evaluation units in easily accessible locations. The advantage of such a solution over punctiform smoke detectors is, for example, that they can be serviced very easily without having to interrupt business operations.
Production and assembly halls are typically extensive multi-story buildings that offer the necessary space for machinery and systems. Such halls are often not structurally subdivided, and the individual areas are interconnected by fully-automated conveyor systems.
Technical defects, such as short circuits at production facilities
Highly flammable materials
Rapid spreading of fire due to open spaces and interconnecting conveyor systems
Sprinkler systems are often the ideal solution for production and assembly areas. Their basic concept of selective extinguishing satisfies the applicable requirements. In case of activation, the water is not dispersed throughout the entire production and assembly hall.